Sensors KITURAMI GB-300, HB-610, WL-100, SD-500

Temperature sensors of the body carrier

• Controls the water temperature of the heating system, sends a signal to the control unit.
• Models: GB-300, GB-610, OS-200, M-100, 3.56DT-500C, SD-500, HB-6101.

Cold water temperature sensors

• Controls the water temperature of the heating system, sends a signal to the control unit.
• Models: HB-610, GB-620.

Hot water temperature sensors

• Controls the water temperature of the heating system, sends a signal to the control unit.
• Models: GB-6201.

Low level sensors of the coolant

• To ensure safe operation, Kiturami boilers are equipped with various sensors, one of which is a coolant level sensor. The automatic action of the sensor occurs during a low level of the coolant and activates the safety devices. The burner operation is blocked when abnormal gorenje leads to overheating.
• Models: H.U., WL-100.

Overheating sensors 105 °C

• The overheating sensor is a thermobimetallic fuse that is triggered when overheating. Therefore, it does not physically fail, but simply breaks the fuel supply chain, and is easily restored by pressing.
• Models: with and without a button.

Flame monitoring sensors

• The flame control sensor is a safety element of the boiler and is designed to determine the presence of a flame by the light flux. Turns off the fuel supply in the absence of a spark.
• Models: S3A, P1/1, SDF, RS-200, IRD-1020, CDS-2025, CDS-010, TB-300/400.

Gas leak sensors

• Sensors detect an increase in the concentration of gas in the air, detect a leak in a timely manner and notify others about it.
• Models: TGS 813.

Seismic sensors

• Seismic sensors are sensitive to extraneous vibrations.

Air pressure sensors (pressostats)

• The pressure sensor is used to monitor the pressure of the coolant in the heating system, information about the pressure state is transmitted to the boiler control unit.
• Models: P.TGB-30K.

• Sensors. Technical specifications.